What Supplies Do You Need to Do Your Own Acrylic Nails

Love having acrylic nails and desire to attempt your hand at doing them yourself? While it might look elementary when you lot're watching a trained nail technician, it volition have time and patience to learn how to apply acrylic nails yourself at home. However, it can exist achieved with some do! To help you become started, hither at Naio Nails, nosotros've created a stride-by-step guide and video tutorial with all the products and information y'all'll need.

Before you get started, bank check out our video tutorial on the nuts of acrylic application, which you lot can also refer back to when applying acrylic nails yourself:

How to Apply Acrylic Nails

The products you'll need:

• Cuticle Pusher
• Nail File & Buffing Block
• Blast Prep/Dehydrator
• Acid Free Nail Primer
• Dappen Dish
• Acrylic Nail Brush
• Lint Free Wipes
• Acrylic Pulverization
• Acrylic Liquid (we recommend Medium Speed or Maximum Adhesion for beginners as you have a slower drying time)
• Top Glaze (either Air Dry out, Mega Gloss or Matte Top Coat)
• Blast Tips (optional)
• Nail Glue (optional)
• Pure Acetone (optional)
• Cuticle Oil (optional)
• Pinching Tool (optional)
• Manicure Castor (optional)

Pace 1. Prepping the Nail

Before you start, first, yous will demand to principal prepping the nail!

1.  Gently push the cuticle back with your cuticle pusher, ensuring no cuticle remains on the smash bed, as the acrylic will not stick to it.

ii. Use a buffing block to remove all shine to the nail by softly swiping left and right over the unabridged nail bed.

3. Remove grit either with your manicure castor or wipe over with some acetone on a lint-free pad.

Applying a Nail Tip (Optional)

At this phase, you tin utilise your nail tips if you're using them, if not, skip to the adjacent department.

ane. Choice out the correct sized nail tips that fit your nails snugly and lay them out set up.

two. Utilise a modest amount of nail glue to the tip where it will meet your natural nail bed.

three. Press and hold the nail tip (with nail glue on) firmly to the smash for near 10 seconds or until you can feel the tip has stuck. If information technology is lifting up at the sides you can apply your pinching tool or an angled pair of tweezers to gently hold the wings down.

four. Using nail tip cutters or nail scissors (trickier to use), cut/snip the smash tip to your desired length.

v. File down the nail tip to the shape yous would like (e.yard almond, square, bury, etc) don't file upwards from the underneath of the tip though or you may crusade it to pop off, you tin support the acme of the blast while filing to preclude this from happening as well.

If the tip hasn't blended with your natural smash and you can experience a ridge, gently buff over the join with a soft file and get a lint-free pad and apply a modest amount of pure acetone to information technology. Wipe the pad side to side over the join between the boom tip and your natural nail to make the tip blend in with your nail.

six. Ensure no dust remains from the filing of the tip and apply nail prep/dehydrator to the unabridged boom bed, this should quickly air dry out leaving the nail a slightly white/matte finish.

7. Utilise acid-free blast primer to the unabridged blast bed.

Step 2: Applying the Acrylic

1. Pour your acrylic liquid into your dappen dish.

2. Dip the acrylic brush into the dappen dish and push the brush tip to the bottom of the dappen dish to become the air bubbling out.

iii. Swipe the castor on the edge of the dappen dish in one case to get the excess liquid off.

four. Dip the castor tip into the acrylic powder and stroke the castor through the powder towards yous until yous create a ball of acrylic (it should look like a tiny golf game ball- if the ball is too wet or dry, kickoff again).

5. Press the castor (with acrylic powder ball on) to a lint-free pad to drain the backlog liquid off.

half-dozen. Apply the ball of acrylic to the top of the smash (near the cuticle) and bring the bead downwardly to the very tip. Tilt the boom down as you lot are doing this as it will foreclose the acrylic flooding the cuticles.

7. Sculpt the acrylic by pressing the castor flat to your nail and gently moving the acrylic to polish out bumps and to spread it out evenly (remember to proceed your brush clean by dipping it into the acrylic liquid while doing this).

8. If you need more acrylic to cover the entire nail, repeat steps ii-7 until you're happy with the coverage of the nail.

Using a Pinching Tool (Optional)

Later you have practised doing acrylic for a while or are confident doing basic acrylics, you can utilize a pinching tool on the smash to make the nail longer, more than slender, and to make a stronger C curve, which volition brand the nail stronger. If you're not using a pinching tool, movement onto the next steps.

• When the acrylic is yet drying (just it doesn't feel tacky) identify the Pinching Tool on the nail like a clamp (move the tool further down the smash if it's pinching too hard and it will compression a little less). If you want it to compression really narrow so utilise the lesser end of the pinching tool.
  
• Go out on for about three minutes.
  
• Tap the blast to encounter if it makes a 'ting' sound (if not, leave it on a fleck longer) and and then remove the pinching tool past squeezing the sides apart.

9. Wait a piffling over ii minutes for the acrylic to dry out (it should 'ting' when y'all tap information technology- when information technology'southward not dry it will sound hollow).

10. File the unabridged nail until information technology is smooth on the top and effectually the edges and to brand the shape more defined. (The higher the dust count on the nail file, the smoother the file. i.e 240/240 is smoother than an eighty/80 boom file).

11. Now you need to add a pinnacle coat to seal in the acrylic. The two steps below evidence 2 means of doing this:

If you DON'T have a lamp to dry out your acrylics:

– Employ Air Dry out Summit Coat to your entire blast and go out to dry for nearly two minutes.

If you lot DO have a lamp:

– Apply Urban Graffiti Top Coat / Mega Gloss or Matte Pinnacle Coat (depending on which finish yous desire).

– Put your hand under the lamp and turn on.

– Get out to cure (dry) for 2 minutes under a UV lamp (or one minute for a LED lamp).

– When the time is up, remove your hand.

12. Stop off the look past adding a stroke of cuticle oil to the cuticle area of each nail and rub in with your fingers.

And you're washed! You can now enjoy your new acrylic nails and exist proud that you lot did information technology all yourself. Retrieve, it may take a few tries to get them perfect, just, with some practise, yous'll soon exist applying acrylic nails at home like a pro!

Now you know how to apply acrylic nails yourself, it'south also a skilful idea to learn how to remove them yourself after two-4 weeks. You lot tin find all the steps you need for this in our How to Remove Safely Acrylic Nails blog post.

Shop the total acrylic range at Naio Nails today!

Shop Now

mcguirearniagaten.blogspot.com

Source: https://naio-nails.com/blog/beginners-guide-to-applying-acrylic-nails/

Share this post